{"title":"Mommy Material","description":"\u003cp\u003eMommy Material is a South African brand centred on the practical realities of feeding a baby, from the first weeks of breastfeeding through to pumping and returning to work. Its core range is wearable breast pumps, designed to slot into an ordinary day rather than take it over, whether that's at a desk, in the car or in whatever gap you can find.\u003c\/p\u003e\u003cp\u003eBeyond the pumps, Mommy Material speaks to the wider experience of early motherhood: the routines, the recovery, the good days and the harder ones. It's a brand for the parent who wants gear that keeps pace with her life, and a tone that never turns feeding into a performance. Browse the Mommy Material range at Pandylane.\u003c\/p\u003e","products":[{"product_id":"mommy-material-freely-collection-cup-28mm","title":"Mommy Material Freely Collection Cup 28mm","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Collection Cup 28mm\u003c\/strong\u003e is a spare collection cup for the Mommy Material Freely Electric Wearable Breast Pump. If you're after a backup cup to keep your pumping routine going while another is in the wash, or you're replacing one that's showing signs of wear, this is the milk-contact part that catches and holds your expressed milk during a session.\u003c\/p\u003e\u003cp\u003eThe 28mm cup is designed for efficient milk collection and a comfortable fit while you pump. It's made from durable, BPA-free, food-grade plastic, with a transparent body so you can check your milk volume at a glance and a wide opening that makes pouring and cleaning easier.\u003c\/p\u003e\u003ch3\u003eWhy keep a spare on hand\u003c\/h3\u003e\u003cp\u003eCollection cups are milk-contact parts, so they need regular cleaning between sessions and replacing over time. Having an extra 28mm cup means you can carry on pumping without waiting for parts to dry, and swap in a fresh one the moment the original starts to wear.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cp\u003eThis cup is compatible with the Freely Electric Wearable Breast Pump. Fit it in place of your existing cup following your pump's assembly instructions, and clean it according to the pump's care guidance. To maintain hygiene and performance, replace the collection cup every 3–6 months, or sooner if you notice any signs of wear.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Collection Cup 28mm\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlready use the Freely Electric Wearable Breast Pump and need a matching 28mm cup\u003c\/li\u003e\n\u003cli\u003eWant a spare on hand to keep pumping while another cup is being cleaned\u003c\/li\u003e\n\u003cli\u003eAre replacing a cup that's reached the end of its recommended lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the right fit if you use a different pump system, as this cup is designed specifically for the Freely.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282541166769,"sku":"MYM-FCC","price":149.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-freely-collection-cup-28mm-1.jpg?v=1784526600"},{"product_id":"mommy-material-freely-silicone-diaphragm","title":"Mommy Material Freely Silicone Diaphragm","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Silicone Diaphragm\u003c\/strong\u003e is a replacement milk-path part for the Freely Electric Wearable Breast Pump. It acts as a barrier that keeps breast milk and moisture from reaching the motor and tubing, helping maintain a hygienic, closed pumping system while supporting consistent suction. If your suction feels less reliable or you can see moisture where it shouldn't be, a worn diaphragm is a common cause — and keeping a fresh spare on hand means you can get back to pumping without interruption.\u003c\/p\u003e\u003cp\u003eMade from BPA-free, medical-grade silicone, this soft part is designed specifically for the Freely wearable pump. Because it's a flexible silicone component, it naturally stretches with use over time, which is why it's treated as a wear part that's replaced on a schedule rather than kept indefinitely.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarrier protection:\u003c\/strong\u003e The diaphragm sits in the milk path and blocks milk and moisture from travelling into the tubing and motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed system:\u003c\/strong\u003e By keeping the milk path separated from the motor, it helps maintain a hygienic, closed pumping setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal and suction:\u003c\/strong\u003e A soft, intact diaphragm helps the pump hold its vacuum, which supports consistent suction strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\u003cp\u003eBecause it's a soft silicone part, the diaphragm stretches and wears with use, so replacing it on time helps keep suction and hygiene where they should be. As a guide, replace it every 3 to 6 months if you pump between one and three times a day. If you pump more often than that, or you're exclusively pumping, replace it every 2 months — or sooner at the first sign of wear such as stretching or a loss of fit.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Silicone Diaphragm\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the Freely Electric Wearable Breast Pump and want a genuine, compatible replacement part\u003c\/li\u003e\n\u003cli\u003eHave noticed weaker or less consistent suction and suspect a worn soft part\u003c\/li\u003e\n\u003cli\u003eWant to keep a spare on hand so a small part never holds up a pumping session\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt won't fit other pump models — it's designed specifically for the Freely wearable pump.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282541461681,"sku":"MYM-FSD","price":65.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-freely-silicone-diaphragm-1.jpg?v=1784526605"},{"product_id":"mommy-material-freely-silicone-inserts","title":"Mommy Material Freely Silicone Inserts","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Silicone Inserts\u003c\/strong\u003e are replacement fit inserts for the Freely Electric Wearable Breast Pump. They sit inside the pump's breast shield to reduce the tunnel size, so if the standard flange feels a little roomy, an insert can bring the fit closer to your own nipple dimensions. Made from soft, BPA-free, food-grade silicone, they cushion the seal against your skin, which helps keep expressing comfortable.\u003c\/p\u003e\u003cp\u003eFit is one of the biggest comfort factors when you're pumping, and it isn't something you can reliably guess from bra size. These inserts come in a choice of breast shield sizes so you can dial in a more personalised fit — a snugger, better-aligned seal that tends to feel gentler and helps the pump hold its vacuum. If you've found the wearable pump slightly uncomfortable or not quite sealing the way you'd like, a different insert size is often the simplest place to start.\u003c\/p\u003e\u003ch3\u003eFinding your size\u003c\/h3\u003e\u003cp\u003eThe inserts are available in 19 mm, 21 mm and 24 mm, so you can choose the option that best matches your nipple diameter. It's worth taking the time to work out your measurement rather than defaulting to the standard size, since a well-matched insert is what makes the difference between a comfortable session and a fiddly one.\u003c\/p\u003e\u003ch3\u003eCaring for and replacing your inserts\u003c\/h3\u003e\u003cp\u003eSilicone is a soft, flexible material, and like all soft pump parts it wears over time. Check your inserts regularly for any signs of stretching, tearing or general degradation, as worn parts can affect how the pump performs. Mommy Material recommends replacing the silicone inserts every 2–3 months, or sooner if you notice any wear.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Silicone Inserts\u003c\/strong\u003e are a good option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the Freely Electric Wearable Breast Pump and want a more personalised fit\u003c\/li\u003e\n\u003cli\u003eFind the standard breast shield a little large and are looking to size down for comfort\u003c\/li\u003e\n\u003cli\u003eNeed to refresh worn soft parts to keep the pump working as it should\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThey won't fit other pump systems, so they're only suitable if you're using the Freely Electric Wearable Breast Pump.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"24mm","offer_id":47282541854897,"sku":"MYM-FSI-24","price":43.0,"currency_code":"ZAR","in_stock":true},{"title":"19mm","offer_id":47282541887665,"sku":"MYM-FSI-19","price":43.0,"currency_code":"ZAR","in_stock":true},{"title":"21mm","offer_id":47282541920433,"sku":"MYM-FSI-21","price":43.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-freely-silicone-inserts-1.jpg?v=1784526611"},{"product_id":"mommy-material-freely-silicone-valve","title":"Mommy Material Freely Silicone Valve","description":"\u003cp\u003eThe Mommy Material Freely Silicone Valve is a replacement duckbill valve for the Freely Electric Wearable Breast Pump. It's one of the small, soft milk-path parts that does a big job: the valve stretches and releases each time the pump motor pulls at it, which helps create the suction that draws milk during a session, while helping to prevent milk from flowing back into the pump. Keeping a fresh valve on hand is the simplest way to keep your pump working the way it should.\u003c\/p\u003e\u003cp\u003eMade from durable, BPA-free, food-grade silicone, it's designed as a wear part — the kind of spare you'll want to rotate through regularly rather than a one-off replacement. If your pump has started to lose suction, a worn valve is often the first thing worth checking.\u003c\/p\u003e\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\u003cp\u003eSilicone valves soften and wear with use, and the flaps can develop a small hole over time. As a general guide from Mommy Material:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplace every month if you pump 3 or more times per day.\u003c\/li\u003e\n\u003cli\u003eReplace every 2–3 months if you pump less than 3 times per day.\u003c\/li\u003e\n\u003cli\u003eReplace sooner if you can see a small hole between the two flaps, or if your pump seems to have lost suction — a hole means the valve can't hold the vacuum as well during a session.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCaring for your valve\u003c\/h3\u003e\u003cp\u003eA little care goes a long way towards extending the life of each valve:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eDo not wash it in the dishwasher.\u003c\/li\u003e\n\u003cli\u003eWash in hot, soapy water using a clean brush.\u003c\/li\u003e\n\u003cli\u003eAllow it to dry fully before reassembling your pump.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis valve is designed specifically for the Freely Electric Wearable Breast Pump. It isn't a universal part, so it's worth confirming you have the Freely pump before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Because valves are a low-cost wear part, many parents keep a spare in their pumping kit — so if one tears or your suction drops mid-routine, you're not waiting on a delivery to get back to expressing.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282542411953,"sku":"MYM-FSV","price":58.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-freely-silicone-valve-1.jpg?v=1784526623"},{"product_id":"mommy-material-freely-single-wearable-breast-pump","title":"Mommy Material Freely Single Wearable Breast Pump","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Single Wearable Breast Pump\u003c\/strong\u003e is a hands-free, in-bra electric pump designed to sit inside your standard nursing bra so you can express without external tubing or a separate motor unit. It's a single wearable pump built for moms who want to keep moving — whether that's expressing at your desk, on the school run, or during a quiet moment at home while baby sleeps.\u003c\/p\u003e\u003cp\u003eBecause it tucks discreetly into your bra, the fit hinges on getting the compression right: the pump needs to sit firmly against the breast with no gaps, and every bra offers a different level of support. A bra adjustment buckle is included to help you create a snugger fit, and if your bra is particularly structured you may need to adjust it before each session. You manage everything through the intuitive Digital LED display or the connected smartphone app, so you can control your session directly on the pump or remotely from your phone.\u003c\/p\u003e\u003ch3\u003eThree modes with 12 adjustable levels\u003c\/h3\u003e\u003cp\u003eThe Freely offers 12 adjustable levels across three distinct modes — Expression Mode, Two-in-One Mode, and Dual Frequency Mode — so you can tailor each session to what your body needs on the day. A stimulation-style setting helps encourage let-down before you move into expression, and being able to dial the level up or down means you can find a setting that stays comfortable rather than chasing the highest number.\u003c\/p\u003e\u003ch3\u003eA fit you can personalise\u003c\/h3\u003e\u003cp\u003eFit matters more than suction strength when it comes to comfort, which is why the Freely comes with a 28mm breast shield as standard plus additional flange inserts in 24mm, 21mm, and 19mm. The shields are made from 100% food-grade silicone for a soft, secure seal, and having a range of sizes to work through makes it easier to land on a fit that suits your nipple diameter. Aligning your nipple in the centre of the flange insert and keeping a proper seal throughout the session is key to comfortable, effective expressing.\u003c\/p\u003e\u003ch3\u003eQuiet, portable, and easy to keep track of\u003c\/h3\u003e\u003cp\u003eThe Freely runs on a 1100mAh rechargeable lithium battery that supports 4–5 full pumping sessions per charge, charged via the included USB Type-C cable (use a 5V adapter — a higher voltage can cause charging issues). The motor operates at less than 45dB, keeping sessions discreet whether you're in the office or in public. A built-in light lets you monitor milk flow even during late-night pumping, and the 180ml (6oz) capacity means fewer interruptions to empty mid-session.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-bra wearable design:\u003c\/strong\u003e The whole unit sits inside your nursing bra against the breast, so there's no external tubing or separate base to carry, and no need to hold anything in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp and on-device control:\u003c\/strong\u003e You can start, adjust, and track your session from the LED display or remotely through the connected smartphone app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-backflow system:\u003c\/strong\u003e A backflow barrier is designed to stop milk flowing back toward the motor, which helps keep the milk path more hygienic and protects the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable motor:\u003c\/strong\u003e The motor removes from the rest of the pump so you can pour out expressed milk without liquid reaching its internal workings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Freely Single Wearable Breast Pump\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWant a hands-free, discreet pump they can wear inside a standard nursing bra while getting on with the day\u003c\/li\u003e\n\u003cli\u003eValue adjustable control, with 12 levels across three modes to fine-tune each session\u003c\/li\u003e\n\u003cli\u003eNeed something quiet and portable for work, travel, or night feeds\u003c\/li\u003e\n\u003cli\u003eWould like the option to manage or track sessions from a phone app\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the best fit if you:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrefer to see milk flow clearly in an open, traditional flanged bottle setup\u003c\/li\u003e\n\u003cli\u003eWant a double pump to express both sides at once\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMedical aid and warranty\u003c\/h3\u003e\u003cp\u003eThe Freely is registered with MediKredit and is eligible for medical aid reimbursement, which can make it more accessible for moms in South Africa. It's covered by a 1-year warranty on the IC Board\/Motor and a 6-month warranty on the pump battery. Note that the warranty is only valid once your pump is registered, so complete the registration process to activate it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Take a moment to check your bra's compression before every session — because each bra supports the pump differently, getting a firm, gap-free fit first makes a real difference to your seal. Keep your flange inserts and valve in good condition too; worn soft parts affect suction, so replace them as your manual advises.\u003c\/p\u003e\u003ch3\u003ePlease note\u003c\/h3\u003e\u003cp\u003eAlways remove the motor from the rest of the pump before pouring out expressed milk — milk leaking into the motor can cause serious damage to its internal workings. Pumping should feel comfortable: pain, rubbing, or excessive discomfort is a sign to stop and reassess your flange size, fit, or suction level, and to seek support if it continues. This product is currently available on a pre-order basis; by placing a pre-order you acknowledge that your item will be dispatched once the new stock arrives, and we'll keep you updated on any changes to the expected timeline.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282542805169,"sku":"MYM-FSWP","price":2199.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-freely-single-wearable-breast-pump-1.jpg?v=1784526630"},{"product_id":"mommy-material-milk-it-breast-shield","title":"Mommy Material Milk It Breast Shield","description":"\u003cp\u003eThe Mommy Material Milk It Breast Shield is a replacement flange for the Milk It Single and Double Wearable Breast Pumps. As one of the milk-contact parts of your pump, it sits against the breast to create the seal the pump works through, so keeping a well-fitting shield in good condition is part of keeping your pumping sessions comfortable and your milk flowing smoothly. Whether you're replacing a worn shield or keeping a spare on hand, this part is made to fit the Milk It wearable pumps directly.\u003c\/p\u003e\u003cp\u003eIt's crafted from BPA-free, food-grade materials, designed for a snug fit and easy to clean and sterilise between sessions. This shield is a 28 mm size.\u003c\/p\u003e\u003ch3\u003eWhy the right fit matters\u003c\/h3\u003e\u003cp\u003eA correctly sized breast shield makes a real difference to how expressing feels and how well the pump draws milk. A flange that doesn't fit well can lead to discomfort, reduced milk flow, and even nipple damage. The Mommy Material Milk It Breast Shield is designed to accommodate various nipple sizes, helping you find a proper fit and get the most from each session. If you're unsure about sizing, it's worth measuring your nipple diameter rather than guessing, as fit isn't reliably estimated from bra or cup size.\u003c\/p\u003e\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\u003cp\u003eBreast shields are wear parts. Over time they can lose their original shape, which can affect suction efficiency and milk flow. It's recommended to inspect your shield every 3–6 months and replace it if you notice visible signs of wear, discolouration, or a drop in suction strength. Keeping a fresh shield in rotation means you're not caught out mid-routine by a part that's past its best.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe Mommy Material Milk It Breast Shield is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the Milk It Single or Double Wearable Breast Pump and need a matching replacement flange\u003c\/li\u003e\n\u003cli\u003eWant a 28 mm shield to suit their fit\u003c\/li\u003e\n\u003cli\u003ePrefer to keep a spare on hand or refresh a shield that's showing wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the right fit if you use a different pump system, as this shield is designed specifically for the Milk It wearable pumps, or if you need a shield in a size other than 28 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Set a reminder to check your shield when the season changes — a quick look for cloudiness, warping or a softer seal every few months is the easiest way to stay ahead of any drop in performance.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282543132849,"sku":"MYM-MBS","price":185.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-breast-shield-1.jpg?v=1784526657"},{"product_id":"mommy-material-milk-it-collection-cup","title":"Mommy Material Milk It Collection Cup","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Collection Cup\u003c\/strong\u003e is a replacement milk collection cup made for the Milk It Single and Double Wearable Breast Pumps. It's the milk-contact part that catches your expressed milk during a pumping session, so keeping a spare on hand means you can swap in a fresh cup when your current one is being washed, has gone missing, or is starting to show its age.\u003c\/p\u003e\u003cp\u003eCrafted from BPA-free, food-grade polypropylene (PP plastic), the cup is built to hold its shape through frequent sterilising and everyday handling. It holds up to 150 ml, has a wide opening for easy pouring and cleaning, and a secure-fit design that helps prevent milk spills while you pump.\u003c\/p\u003e\u003ch3\u003eWhy polypropylene\u003c\/h3\u003e\u003cp\u003eUnlike silicone-based cups, polypropylene offers strong impact resistance and is designed to withstand repeated sterilisation without degrading or losing its shape. That sturdy-yet-lightweight construction makes the cup easy to handle and simple to work into your routine, whether you're expressing on a quick break or settling in for a longer session.\u003c\/p\u003e\u003ch3\u003eHow it Works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMilk-contact collection:\u003c\/strong\u003e The cup fits into the Milk It wearable pump and receives your expressed milk directly, ready to pour out through the wide opening once you're done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit:\u003c\/strong\u003e The cup is shaped to sit snugly in the pump, which helps prevent milk spills during use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 ml capacity:\u003c\/strong\u003e The generous volume supports longer sessions, so you're not stopping to empty the cup as often.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCleaning and replacing\u003c\/h3\u003e\u003cp\u003eThe wide opening makes the cup easy to clean, and it's designed to cope with regular sterilising. Even so, it's a wear part rather than a forever item. Inspect it regularly and replace it every 4–6 months, or sooner if you notice wear, cracking, discolouration or odour. Following the manufacturer's cleaning and replacement guidance helps keep your pumping equipment working as it should.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Collection Cup\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the Milk It Single or Double Wearable Breast Pump and need a replacement collection cup\u003c\/li\u003e\n\u003cli\u003eWant a spare cup on rotation to make cleaning turnaround easier\u003c\/li\u003e\n\u003cli\u003ePrefer a rigid polypropylene cup that stands up to frequent sterilising\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the right fit if you use a different pump system — this cup is designed specifically for the Milk It wearable pumps, so check your pump model before ordering.\u003c\/p\u003e\u003ch3\u003eDisclaimer\u003c\/h3\u003e\u003cp\u003eReplace the cup every 4–6 months, or sooner if there are signs of wear, cracking, discolouration or odour, as a worn cup can affect the pump's efficiency and hygiene. Always follow the manufacturer's cleaning, sterilising and replacement instructions.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282543526065,"sku":"MYM-MCC","price":95.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-collection-cup-1.jpg?v=1784526663"},{"product_id":"mommy-material-milk-it-double-wearable-breast-pump","title":"Mommy Material Milk It Double Wearable Breast Pump","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Double Wearable Breast Pump\u003c\/strong\u003e is a hands-free, in-bra electric pump that sits inside your bra so you can express milk without being tethered to a table or a wall socket. Because both collection cups are self-contained and cordless, you can move around, work, or rest while you pump — a practical option if you want to reclaim some of the time a traditional flanged pump ties up. This is the double version, so both sides express at once.\u003c\/p\u003e\u003cp\u003eEach cup holds up to 150 ml and runs off a built-in 1500 mAh rechargeable lithium battery, charged via the included USB cables, so you're not dependent on a plug point during a session. An LED display shows suction strength and battery level at a glance, and a built-in memory function saves your preferred settings so you can pick up where you left off next time. The motor is designed to run quietly for more discreet pumping at work, while travelling, or while baby sleeps.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour pumping modes:\u003c\/strong\u003e Stimulation, Express, Two-in-One and Dual-Frequency let you move between a lighter stimulation pattern and stronger expression, or combine them, depending on what suits you at the time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable intensity:\u003c\/strong\u003e Each mode offers 4–6 intensity levels, so you can dial the setting up or down rather than being locked to a fixed strength. Maximum suction is rated at 300 mmHg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-backflow system:\u003c\/strong\u003e A backflow barrier is built into the milk path to help keep expressed milk separate from the motor, supporting a more hygienic setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit options:\u003c\/strong\u003e Comes with a breast shield and a choice of flange insert sizes to help you find a more comfortable seal, since flange fit varies from person to person and isn't determined by bra size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials and cleaning\u003c\/h3\u003e\u003cp\u003eEvery milk-contact component is made from BPA-free, food-grade plastic and silicone. The cups come apart quickly for cleaning and are compatible with boiling water or a standard steriliser, so you can disinfect the parts between sessions. The pump carries an IP40 dust protection rating.\u003c\/p\u003e\u003ch3\u003eHow to use\u003c\/h3\u003e\u003cp\u003eWhen a session is finished, remove the pump motor (hub) before pouring milk out of the bowl — this helps avoid accidental spillage onto the motor.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Double Wearable Breast Pump\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWant to pump both sides at once without holding equipment in place\u003c\/li\u003e\n\u003cli\u003eNeed to express discreetly at work, while travelling, or on the move\u003c\/li\u003e\n\u003cli\u003ePrefer a cordless, rechargeable pump they can use away from a plug point\u003c\/li\u003e\n\u003cli\u003eLike being able to adjust modes and intensity to suit each session\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the best fit if you:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrefer to see milk flowing into a bottle as you pump, which a conventional flanged pump makes easier\u003c\/li\u003e\n\u003cli\u003eWant to compare and swap a wide range of separate components across a larger flange ecosystem\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDisclaimer\u003c\/h3\u003e\u003cp\u003eThis pump is available as a single or double set; this listing is for the double. Colours are Gold and Rose Gold. The warranty covers the IC board\/motor for 1 year and the pump battery for 6 months, and is only valid once your pump is registered. If pumping causes pain, rubbing or swelling, stop and reassess your fit or seek support from a lactation professional — pump output on its own is not a measure of your milk supply.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Flange fit makes a real difference to comfort with wearable cups. Start with the insert that feels closest, and if the tunnel pinches or draws in too much tissue, try a different size before turning the suction up.\u003c\/blockquote\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282543919281,"sku":"MYM-MDWP","price":3590.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-double-wearable-breast-pump-1.jpg?v=1784526651"},{"product_id":"mommy-material-milk-it-silicone-gas-storage","title":"Mommy Material Milk It Silicone Gas Storage","description":"\u003cp\u003eThe Mommy Material Milk It Silicone Gas Storage is the replacement backflow protector for the Milk It Single and Double Wearable Breast Pumps. It sits in the milk path between the collection cup and the pump, where its job is to stop expressed milk and moisture from flowing back into the pump mechanism — helping keep your milk path clean and protecting the motor from milk overflow.\u003c\/p\u003e\u003cp\u003eMade from soft, food-grade, BPA-free silicone, the backflow protector is a wear part rather than an upgrade. Because the soft silicone flexes with every session, it naturally stretches over time, which is why keeping a fresh one on hand is worth it if you pump regularly. Having a spare ready means a torn or stretched piece never has to interrupt your pumping routine.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackflow barrier:\u003c\/strong\u003e The silicone piece blocks milk and moisture from travelling back toward the pump motor, keeping the milk path and motor separated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal and suction:\u003c\/strong\u003e When the silicone is intact it holds its seal, which helps the pump maintain suction; a stretched or cracked piece can reduce the suction you feel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\u003cp\u003eBackflow protectors wear with use, so it helps to inspect yours and swap it out before performance drops. As a guide from the supplier:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePumping 1 to 3 times a day: replace every 3 to 6 months.\u003c\/li\u003e\n\u003cli\u003ePumping more than 3 times a day, or exclusively pumping: replace every 2 months.\u003c\/li\u003e\n\u003cli\u003eWhatever your routine: replace sooner if you notice any cracks, leaks, stretching or a drop in suction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCleaning\u003c\/h3\u003e\u003cp\u003eThe backflow protector is easy to disassemble, clean and sterilise between uses. Always follow the cleaning and sterilising instructions supplied with your Milk It pump for the correct method.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis backflow protector is designed specifically for the Milk It Single and Double Wearable Breast Pumps. It is a model-specific spare, so it's suited to those pumps rather than being a universal fit across other brands.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe Mommy Material Milk It Silicone Gas Storage is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOwn a Milk It Single or Double Wearable Breast Pump and need a genuine replacement backflow protector\u003c\/li\u003e\n\u003cli\u003ePump regularly and want a fresh spare on hand before the current one stretches or tears\u003c\/li\u003e\n\u003cli\u003eHave noticed reduced suction or visible wear and want to restore a clean, sealed milk path\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282544181425,"sku":"MYM-MSD","price":59.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-silicone-gas-storage-1.jpg?v=1784526669"},{"product_id":"mommy-material-milk-it-silicone-insert","title":"Mommy Material Milk It Silicone Insert","description":"\u003cp\u003eThe Mommy Material Milk It Silicone Insert is a replacement flange insert that lets you fine-tune the fit of your Milk It Single or Double Wearable Breast Pump. Made from 100% medical-grade silicone, it sits inside the pump's flange to create a softer, more personalised seal against your skin — helpful whether you're replacing a worn insert or trying a different size to get more comfortable.\u003c\/p\u003e\u003cp\u003eGetting the flange fit right is one of the most important parts of a comfortable pumping session, and it isn't something you can reliably guess from bra size. This insert is available in \u003cstrong\u003e21 mm\u003c\/strong\u003e and \u003cstrong\u003e24 mm\u003c\/strong\u003e, so you can dial in the size that suits your body. A well-fitted insert helps the pump maintain a good seal, which supports comfortable, efficient expression during each session.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonalised fit:\u003c\/strong\u003e The insert reduces the flange tunnel diameter, giving you a closer fit if your nipple sits smaller than the standard opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft silicone seal:\u003c\/strong\u003e The flexible medical-grade silicone cushions the contact point and helps the pump hold its vacuum, which can make higher settings feel gentler.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComfort-led design:\u003c\/strong\u003e A snug, correctly sized seal is designed to keep pumping comfortable and support efficient milk removal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThis insert is designed specifically for the Mommy Material Milk It Single and Double Wearable Breast Pumps. It is not a universal part, so it's worth confirming you're using a Milk It wearable pump before ordering.\u003c\/p\u003e\u003ch3\u003eCare and replacement\u003c\/h3\u003e\u003cp\u003eThe insert is easy to clean and sterilise as part of your usual routine. Like all soft silicone pump parts, it's a wear item — over time and repeated sterilising, silicone can stretch, tear or lose its shape. Mommy Material recommends replacing inserts every 2–3 months, or sooner if you notice visible wear or a drop in suction.\u003c\/p\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eThe Mommy Material Milk It Silicone Insert is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse a Milk It Single or Double Wearable Breast Pump and want to find a more comfortable flange fit\u003c\/li\u003e\n\u003cli\u003eNeed a fresh insert to replace one that has worn or lost its shape\u003c\/li\u003e\n\u003cli\u003ePrefer a softer silicone contact against the skin while pumping\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e If pumping feels pinchy or your output has dipped, it's worth checking your insert before anything else — a worn or wrong-sized insert is a common, easily fixed culprit, and keeping a spare on hand means you're never caught out mid-routine.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"21mm","offer_id":47282544410801,"sku":"MYM-MSI-21","price":45.0,"currency_code":"ZAR","in_stock":true},{"title":"24mm","offer_id":47282544443569,"sku":"MYM-MSI-24","price":45.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-silicone-insert-1.jpg?v=1784526675"},{"product_id":"mommy-material-milk-it-silicone-valve","title":"Mommy Material Milk It Silicone Valve","description":"\u003cp\u003eThe Mommy Material Milk It Silicone Valve is a replacement duckbill valve for your breast pump — the small soft part that regulates suction and keeps milk moving during each session. If your pump has started to feel weaker, or you're simply keeping a spare on hand, this is the wear component that restores the seal your pump relies on to express milk efficiently.\u003c\/p\u003e\u003cp\u003eMade from durable, BPA-free silicone, the valve is designed to hold a consistent vacuum and help prevent milk from flowing back through the system. It's a milk-contact part, so it's easy to take apart, clean and sterilise, and quick to swap in when it's time. This valve is compatible with the Milk It Single and Double Wearable Breast Pumps.\u003c\/p\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuckbill design:\u003c\/strong\u003e Also called a duck valve, it has two flexible silicone flaps that stretch and release each time the pump motor pulls, creating the suction that draws milk from the breast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVacuum seal:\u003c\/strong\u003e When the flaps close cleanly, the pump can maintain its vacuum; once they stretch, wear or split, suction drops and expression becomes less efficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackflow barrier:\u003c\/strong\u003e The valve helps keep milk from travelling back through the pump during a session.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhen to replace it\u003c\/h3\u003e\u003cp\u003eSilicone valves are consumable — they stretch and soften with use, so replacing them on a sensible schedule keeps your pump working at its best:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplace roughly every month if you pump 3 or more times a day.\u003c\/li\u003e\n\u003cli\u003eReplace every 2–3 months if you pump less than 3 times a day.\u003c\/li\u003e\n\u003cli\u003eReplace sooner if you notice a small hole between the two flaps, milk backflow, or a general loss of suction — a good rule of thumb is to swap the valve whenever your pump feels like it's lost suction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCleaning and care\u003c\/h3\u003e\u003cp\u003eWash the valve in hot, soapy water using a clean brush, and avoid the dishwasher — hand-washing helps extend the life of the silicone. The valve can also be sterilised along with your other milk-contact parts.\u003c\/p\u003e\u003ch3\u003eBest for\u003c\/h3\u003e\u003cp\u003eThe Mommy Material Milk It Silicone Valve is a great option if you:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse a Milk It Single or Double Wearable Breast Pump and need a replacement duckbill valve\u003c\/li\u003e\n\u003cli\u003eHave noticed reduced suction and suspect a worn valve rather than a motor fault\u003c\/li\u003e\n\u003cli\u003eLike to keep a spare set on hand so a torn valve never interrupts your routine\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Hold the valve up to the light when you inspect it — a tiny slit or hole between the flaps is easy to miss but is usually the reason suction has dropped off.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282545000625,"sku":"MYM-MSV","price":59.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-silicone-valve-1.jpg?v=1784526691"},{"product_id":"mommy-material-milk-it-single-wearable-breast-pump","title":"Mommy Material Milk It Single Wearable Breast Pump","description":"\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Single Wearable Breast Pump\u003c\/strong\u003e is a hands-free, in-bra electric pump that sits inside your bra so you can express milk without holding parts in place or staying near a plug point. It brings the collection cup, motor and milk-contact parts together in one compact unit, making it a discreet, cordless alternative to a traditional flanged setup for parents who want to pump while working, travelling, caring for baby or simply relaxing.\u003c\/p\u003e\u003cp\u003eThis is the single version of the Milk It range (also available as a double), expressing from one side at a time. An LED display shows your suction strength and battery level at a glance, while a built-in memory function saves your preferred settings so you can pick up where you left off each session.\u003c\/p\u003e\u003ch3\u003eFour modes with adjustable control\u003c\/h3\u003e\u003cp\u003eThe Milk It pump offers four pumping modes with 4–6 adjustable intensity levels each, so you can tailor a session to how your body feels on the day rather than settling for a single fixed setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStimulation:\u003c\/strong\u003e A faster, lighter setting intended to encourage let-down at the start of a session.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpress:\u003c\/strong\u003e A slower, stronger setting for drawing milk once it's flowing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-in-One:\u003c\/strong\u003e Combines the stimulation and expression patterns in one cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Frequency:\u003c\/strong\u003e Alternates between rhythms for a varied session.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMaximum suction strength is 300 mmHg, and because the levels are adjustable within each mode, you can dial the intensity up or down to keep expressing comfortable.\u003c\/p\u003e\u003ch3\u003eComfort and fit\u003c\/h3\u003e\u003cp\u003eFit matters more than raw suction when it comes to comfortable pumping, so the Milk It comes with a 28 mm breast shield plus 24 mm and 21 mm flange inserts, giving you a few sizes to work with as you find what suits you. Bra size doesn't reliably predict flange size, so it's worth trying the options included to see which sits most comfortably.\u003c\/p\u003e\u003ch3\u003eMade to move with you\u003c\/h3\u003e\u003cp\u003eThe 150 ml collection cup means fewer stops to empty mid-session, and the built-in 1500 mAh rechargeable lithium battery charges over the included USB cable to support pumping away from a socket — useful during load-shedding, on a commute or at work. An ultra-quiet motor is designed to keep sessions discreet, whether you're at your desk or expressing while baby sleeps, and an IP40 dust-protection rating adds a layer of everyday durability.\u003c\/p\u003e\u003ch3\u003eHygiene and cleaning\u003c\/h3\u003e\u003cp\u003eEvery milk-contact part is made from BPA-free, food-grade plastic and silicone. The pump assembles and comes apart quickly for cleaning and is safe for boiling water or a standard steriliser, so keeping the milk path clean fits into a normal daily routine. An anti-backflow system is designed to help keep milk from moving back through the pump, supporting a more hygienic session.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMommy Material Milk It Single Wearable Breast Pump\u003c\/strong\u003e is a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWant to pump discreetly and hands-free while getting on with other things\u003c\/li\u003e\n\u003cli\u003eNeed a cordless pump they can use away from a plug point\u003c\/li\u003e\n\u003cli\u003eExpress from one side at a time and prefer a compact, all-in-one design\u003c\/li\u003e\n\u003cli\u003eLike being able to fine-tune suction with multiple modes and intensity levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt may not be the best fit if you:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWant to double pump both sides at once (the double version covers this)\u003c\/li\u003e\n\u003cli\u003ePrefer to watch milk flow into a bottle as you express, as a traditional flanged pump allows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDisclaimer\u003c\/h3\u003e\u003cp\u003eBefore pouring out your expressed milk, remove the pump motor first to avoid accidental spillage onto it. The warranty covers the IC Board\/Motor for 1 year and the pump battery for 6 months, and is only valid once your pump has been registered — so complete the registration process to activate your cover.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282545230001,"sku":"MYM-MSWP","price":1795.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-milk-it-single-wearable-breast-pump-1.jpg?v=1784526644"},{"product_id":"mommy-material-ppsu-milk-storage-bottles-160ml-3-pack","title":"Mommy Material PPSU Milk Storage Bottles 160ml 3 Pack","description":"\u003cp\u003eThe Mommy Material PPSU Milk Storage Bottles are a set of three reusable bottles for storing expressed breast milk or made-up formula. Made from medical-grade PPSU (polyphenylsulfone), they're built for the daily routine of expressing, storing and feeding, giving you sturdy containers you can fill, seal, chill and reuse rather than reaching for single-use bags.\u003c\/p\u003e\u003cp\u003eIf you're expressing regularly and want durable, reusable milk storage bottles that stand up to repeated cleaning and sterilising, this set is worth a look. The wide-mouth design makes them easy to fill and pour, and the honey-coloured PPSU is designed to take the wear of everyday use without the fragility of glass.\u003c\/p\u003e\u003ch3\u003eWhy PPSU\u003c\/h3\u003e\u003cp\u003ePPSU is a lightweight, heat-tolerant material, and the warm honey colour is a natural characteristic of it rather than a dye. It's designed to withstand repeated boiling, steam sterilising and UV sterilising without warping or degrading, so the bottles hold their shape and clarity over many cycles. They're BPA-free and free from the harmful chemicals you'd want to avoid around your baby's milk.\u003c\/p\u003e\u003ch3\u003eMade for busy days\u003c\/h3\u003e\u003cp\u003eThe ergonomic, wide-mouth shape is easy to hold, fill and clean, and the opening gives you proper access to reach inside when washing. They're dishwasher-safe, UV-steriliser compatible and can be sterilised by boiling, so they fit whichever cleaning method you already use at home.\u003c\/p\u003e\u003ch3\u003eA thoughtful touch\u003c\/h3\u003e\u003cp\u003eEach bottle carries an encouraging message etched into it \"a small, uplifting reminder of the effort you're putting in. It's a gentle bit of emotional support for the busy days and the quieter midnight feeds, and one of the things that sets this set apart from a plain storage container.\u003c\/p\u003e\u003ch3\u003eKinder on waste\u003c\/h3\u003e\u003cp\u003eBecause they're reusable and made from recyclable material, these bottles suit families looking to cut down on single-use storage over the longer term.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePandylane Pro Tip:\u003c\/strong\u003e Label each bottle with the date you expressed and work through your oldest milk first, so nothing gets forgotten at the back of the fridge or freezer.\u003c\/p\u003e\u003ch3\u003eDisclaimer\u003c\/h3\u003e\u003cp\u003eMilk storage bottles hold expressed milk \"they don't set how long it stays good for. Follow current breast milk storage guidance and your healthcare provider's advice for storage times and temperatures, and allow room for milk to expand if you're freezing.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282545655985,"sku":"MYM-PPMB","price":586.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-ppsu-milk-storage-bottles-160ml-3-pack-1.jpg?v=1784526697"},{"product_id":"mommy-material-temperature-sensing-milk-storage-bags-30s","title":"Mommy Material Temperature Sensing Milk Storage Bags 30s","description":"\u003cp\u003eThe Mommy Material Temperature Sensing Milk Storage Bags are pre-sterilised, BPA-free bags for collecting, freezing and transporting expressed breast milk — with an added twist: an embedded temperature sensor that changes colour to show whether the milk is too cold, too warm, or at the temperature the sensor indicates as ready for feeding. If you've ever second-guessed a warmed bottle or wanted a simpler way to read a bag straight out of the fridge or freezer, this is a milk storage bag that gives you a quick visual cue.\u003c\/p\u003e\u003cp\u003eEach bag is designed to stand upright on its own, which makes filling, labelling and pouring easier and helps reduce the risk of spills while you handle it. A double-zipper seal closes the top for storage and transport, and the clear labelling area gives you space to note the date and volume — a small but genuinely useful detail when you're rotating a supply and want to use your oldest milk first. The bags come in a pack of 30.\u003c\/p\u003e\u003ch3\u003eHow the temperature sensor works\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-changing indicator:\u003c\/strong\u003e An embedded sensor on the bag changes colour to signal the milk's temperature status, so you get immediate visual feedback rather than relying on touch or guesswork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-way read:\u003c\/strong\u003e The sensor is designed to show when the milk is too cold, too warm, or at the temperature indicated as suitable for your baby — a handy check when you're warming a feed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMade for freezer storage and easy handling\u003c\/h3\u003e\u003cp\u003eThe bags are freezer-safe and compact, so they stack neatly and make better use of the space you have. Standing at roughly 12 cm tall, 9.2 cm long and 7 cm wide, they're built to slot in alongside each other rather than sprawl across a shelf. When freezing, remember that milk expands as it freezes, so leave a little headspace rather than filling a bag right to the top.\u003c\/p\u003e\u003ch3\u003eHygiene and materials\u003c\/h3\u003e\u003cp\u003eEach bag arrives pre-sterilised and is made from BPA-free material, so it's ready to receive milk without extra preparation. These are single-use bags designed to be filled once — they're not intended to be washed and reused.\u003c\/p\u003e\u003ch3\u003eBest For\u003c\/h3\u003e\u003cp\u003eThe Mommy Material Temperature Sensing Milk Storage Bags are a great option for parents who:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExpress and want a ready-to-use, pre-sterilised bag for freezing and transporting milk\u003c\/li\u003e\n\u003cli\u003eLike the reassurance of a quick colour cue when checking a feed's temperature\u003c\/li\u003e\n\u003cli\u003eAre building or rotating a freezer supply and want clear labelling for date and volume\u003c\/li\u003e\n\u003cli\u003eNeed bags that stack flat and self-stand to save freezer space\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThey may not be the best fit if you:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrefer reusable bottles or pots over single-use bags\u003c\/li\u003e\n\u003cli\u003eWant a container you can feed directly from without transferring milk\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e Storage times, temperatures and handling for expressed breast milk should follow your own healthcare provider's guidance and the instructions supplied with the product. The temperature sensor is a visual aid and does not replace checking a feed yourself. Guidance for premature or medically vulnerable babies may differ.\u003c\/p\u003e","brand":"Mommy Material","offers":[{"title":"Default Title","offer_id":47282546049201,"sku":"MYM-TSSB","price":229.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/files\/mommy-material-temperature-sensing-milk-storage-bags-30s-1.jpg?v=1784526703"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/9559\/4673\/collections\/Mommy_Material_Brand_Logo.webp?v=1778918152","url":"https:\/\/glenfordo.com\/collections\/mommy-material.oembed","provider":"Pandylane","version":"1.0","type":"link"}