Buying Guides

Breast Pump Flange Sizing Explained: Finding the Right Size for You

Published on 30/10/2026
Written by
Pandylane

Pandylane

The Pandylane Team
Medically reviewed by
Dr Jayden Gelman

Dr Jayden Gelman

MBBCh

Medical doctor
Breast Pump Flange Sizing Explained: Finding the Right Size for You

Pumping shouldn’t hurt — and if it does, or you’re getting less milk than you expected, your flange size is the first thing to check. Most pumps come with a 24 mm flange, but that “standard” size doesn’t fit everyone. The latest research suggests many people pump more comfortably, and get more milk, with a smaller size than the old rules recommend.

In this guide, we’ll show you how to measure, pick your starting size and test the fit, so every session is comfortable, effective and helps protect your supply.

What is a breast pump flange?

The flange (some brands call it a breast shield) is the cone-shaped part of your pump that sits on your breast. Your nipple is drawn into its narrow tunnel with each cycle, and the width of that tunnel, in millimetres, is your flange size. Sizes range from about 13 mm to 36 mm, but most pumps include just a 24 mm, sometimes with a 21 mm or 28 mm.

On a wearable pump, flange fit matters even more. The flange is built into the cup inside your bra, so you can’t see your nipple in the tunnel. You have to judge the fit by feel and by how much milk you get, which makes problems harder to spot. A poor fit is one of the most common reasons wearables feel uncomfortable or seem to pump less, and most come in only one or two sizes, usually 21 mm and 24 mm.

That’s where flange inserts come in. These soft silicone sleeves slide into a larger flange or wearable cup to make the tunnel smaller, so you can get your right size without buying a new pump kit.

Your 60-second flange fit guide

  • Measure your nipple only — not the areola — in millimetres, before pumping, with your nipple gently stimulated.
  • Measure both sides — they’re sisters, not twins! Each side may need a different size.
  • Start close to your measurement, or a maximum of 3 mm bigger. Newer research suggests a closer fit can mean more milk and more comfort.
  • Test and compare. Try one size down and one size up. A good fit feels like a gentle tug, not pain: your nipple moves freely (light contact with the sides is fine), little or no areola is pulled in, and your breasts feel soft and drained afterwards.
  • Re-check every few weeks, as nipple size changes over time.

Why Is Getting the Right Size Flange So Important?

A well-fitted flange makes pumping more comfortable, protects your nipples and helps the pump remove milk well. Lactation specialists, including the Cleveland Clinic, agree that the right size helps avoid sore, swollen or damaged nipples and lets your pump do its job properly.

If the flange is too small, your nipple rubs or gets squeezed in the tunnel. That can cause pain, blisters, cracks and pale or purple nipples after pumping — and pinched tissue can restrict milk flow.

If the flange is too large, too much areola and breast tissue gets pulled into the tunnel. That can cause swelling, a sore ring around the areola, a tugging feeling and a weaker seal. The main milk ducts sit just under the skin near the areola and widen during let-down, so extra tissue in the tunnel may get compressed.

Pumping that hurts is also pumping that's hard to keep up. Getting the fit right is one of the simplest things you can do to make your pumping journey sustainable.

One honest caveat: flange fit is only one piece of the puzzle. Pump strength, suction settings, how often you pump and your own milk supply all play a part — so if output is low, fit is a great place to start, but not the only thing to look at.

What the latest research says (2024–2026)

The research is moving towards smaller, more personal fits — and towards testing sizes on your own body rather than trusting a chart.

The biggest shift came from a 2025 study in the Journal of Human Lactation. Parents who exclusively pumped tried their usual "standard" flange (21 or 24 mm) for a week and a closer-fitting one (13–19 mm) for another. With the smaller size, they pumped more milk on average and found pumping more comfortable. The most popular sizes were 15 mm and 17 mm — far smaller than what comes in most pump boxes. It was a small pilot study, but it's the first to compare sizing methods head-to-head.

Not every study points the same way. Australian research from 2025 found that shields a few millimetres too big didn't reduce milk removal or comfort for most mothers. So if a slightly larger size already works well for you, there's no need to change it. That study also found many mothers measured differently from one session to the next — a good reminder to re-check.

Shape matters as well as size. A randomised trial found that a wider-angled shield, which sits flatter on the breast, removed more milk and felt more comfortable than a standard one.

Experts agree there's still no perfect formula. The Cleveland Clinic describes measurements as a starting point, and a 2026 review of pumping research noted that the evidence is still limited and often funded by pump makers. Our take: measure to find where to start, then let comfort and output decide.

When to measure?

Nipples change size during pregnancy, after birth and as your supply settles — so think of sizing as something you revisit, not a one-off.

  • In pregnancy (36 weeks+): Measuring now gives you a rough idea, so you can have a couple of sizes ready. Hormones keep changing nipple size, so don't buy a full set based on this alone.
  • About 2 weeks after birth: Once your milk has come in and early swelling has gone down, measure properly.
  • Every few weeks after that, and whenever something changes: new pain, a drop in output, a new pump, returning to work or after weaning a session.
  • Time of day: Measure before pumping or feeding, when your nipple is in its "neutral" state. Pumping can temporarily make nipples wider and longer, so a post-pump measurement can push you into a size that's too big.

Why this timeline? Nipples keep changing right through pregnancy: one study that measured women at each antenatal visit found nipple width grew from about 13.6 mm in the first trimester to 15.9 mm at term. That's why an antenatal measurement is only a rough guide. After birth, size can still shift between sessions — Australian researchers found about a third of mothers measured into a different shield size at a later visit. And a randomised trial showed pumping makes nipples temporarily longer and wider, which is why we suggest measuring before you pump. There's no study pinning down the perfect day to measure after birth; around two weeks is the point most lactation consultants suggest, once early swelling has settled.

How to measure your nipples

There are four ways to measure: a nipple ruler (most accurate), a regular ruler (fairly accurate), a coin (handy in a pinch), or getting help in person. Whichever you choose, measure both sides, before pumping, with your nipple gently stimulated.

Base or tip: which should you measure?

You may have seen advice to measure the tip of your nipple rather than the base. Here's the difference:

  • The base is where your nipple meets your areola. It's the traditional measurement, and most pump brands and clinics, still size from it.
  • The tip is the end of your nipple. Many nipples narrow towards the tip, so this number is often a few millimetres smaller. The tip method comes from the Flange FITS™ approach tested in the 2025 study, where starting at the tip measurement led to smaller flanges that gave more comfort and more milk.

Our advice: measure both. Use your base measurement as your main guide, and if your tip is noticeably smaller, try a size closer to the tip as well. Neither method has been proven best yet — the fit test while pumping is what decides.

Method 1: Use a nipple ruler (most accurate)

Many pumps come with a printable or cut-out nipple ruler — if you bought your pump from us, check the box, as one is usually included. 

  1. Gently stimulate your nipple. Roll it between your thumb and finger for a few seconds so it stands out.
  2. Measure the base. Place the ruler across the base, where your nipple meets the areola. Don't include any of the darker areola.
  3. Measure the tip. Note the width across the end of your nipple too.
  4. Repeat on the other side. It's very common for each nipple to be a different size.
  5. Write down both numbers with the date so you can compare next time.

Method 2: Use a regular ruler (fairly accurate)

No nipple ruler? A standard ruler or soft measuring tape in millimetres works too. A couple of sticky notes make it much easier to get a steady reading.

  1. Gently stimulate your nipple by rolling it between your thumb and finger, so it's at its natural full size.
  2. Line up the ruler. Stick one sticky note on the ruler at the 0 mark.
  3. Measure the base. Hold the 0 edge against one side of your nipple base, and place a second sticky note where the other side of the nipple meets the areola. Measure the nipple only, not the areola.
  4. Read the gap between the two notes — that's your nipple diameter in millimetres. Measure side to side, then top to bottom, as many nipples are slightly oval. If the two numbers differ, use the larger one.
  5. Repeat on the other side.

Method 3: The coin check (semi-accurate but handy in a pinch)

No ruler? Hold a coin next to your nipple base. It's the least accurate method, but it's a quick way to get a ballpark — follow up with a ruler before you buy.

Smaller than a 10 cent coin? You're likely under 16 mm — a very common result, and one that standard 21–24 mm flanges often don't suit.

Method 4: Get help measuring

If you're unsure, or the numbers don't match how pumping feels, a lactation consultant can measure you and watch you pump. You're also welcome to visit us at our Experience Centre in Parkhurst — we're happy to help you measure and find your closest fit.

In hospital: many hospitals have lactation consultants, so if pumping becomes part of your feeding plan — whether you planned it or not — ask them to help you measure and check your fit. Just keep in mind that your nipples may be swollen in the first few days after birth, so a size that fits in hospital may not be right a couple of weeks later. Keep checking as you go, and don't be afraid to try different sizes until you find what works.

Choosing your starting size

Start with the flange size nearest your nipple measurement, even if it’s the same size. Then test one size down and one size up. This closer-fit approach is the one used in the 2025 study, where smaller flanges improved both comfort and output.

Use the chart below to pick your starting size, then let the fit test decide.

Measure your nipple base before pumping. Use this chart to pick a starting size, then let comfort and output decide.
Nipple base (before pumping) Starting size Sizes to test
Under 13 mm13 mm13, 15
13–14 mm15 mm13, 15, 17
15–16 mm17 mm15, 17, 19
17–18 mm19 mm17, 19, 21
19–20 mm21 mm19, 21, 24
21–22 mm24 mm21, 24, 25
23–24 mm25–27 mm24, 25, 27
25–27 mm28 mm27, 28, 30
28 mm and up30–32 mmAsk a lactation consultant

Good to know

  • Sizes jump in 2–4 mm steps and vary by brand. Use the nearest size your pump offers, or an insert to get in-between sizes.
  • Size the tunnel to your nipple, never your areola. Measuring the areola is the most common reason people end up in a flange that's far too big.
  • Different sizes for each side is completely normal.

The fit test: how to know you've got it right

A chart gets you close; watching your nipple while you pump tells you the truth. Test each size for a few sessions (the 2025 study used about three sessions per size over a week), on the suction level you normally use in expression mode.

  1. Centre your nipple in the tunnel before you switch on.
  2. Start on low suction and turn it up only until it's comfortable. Stronger isn't better if it hurts.
  3. Watch for a minute after let-down and check the list below.
  4. Check afterwards: how your nipple looks and how soft your breast feels.

Signs of a good fit

  • Your nipple moves gently in and out without rubbing hard against the sides.
  • Little or no areola is pulled into the tunnel.
  • Pumping feels comfortable — a tugging sensation is normal, pain isn't.
  • Your breast feels softer and lighter afterwards.
  • Your nipple looks its normal colour and shape a few minutes after pumping, with no cracks, blisters or bruising.

A note on light contact: with closer-fit sizes, your nipple may brush the tunnel walls. That's fine as long as it's painless and there's no redness or rubbing marks afterwards.

Comparing sizes: keep a quick note of output and comfort (say, 1–10) for each size. If two sizes feel the same, go with the one that empties your breast better.

Too big or too small? The signs side by side

Pain and lower-than-expected output can happen with both. These are the clues that tell them apart.

What you notice Likely too small Likely too big
Nipple movementBarely moves, or looks squashed in the tunnelMoves a lot, swings or bounces
AreolaLittle pulled in, but nipple is tightLots of areola pulled into the tunnel
PainPinching, rubbing or burning on the nippleTugging or soreness around the areola
After pumpingPale, white or purple nipple; a pale ring at the base; blisters or cracksSwollen nipple and areola; a red or sore ring on the areola
SealUsually fineGaps or air leaks, flange slips
OutputLow, breast still feels fullLow, even when you turn suction up

When stretch changes the picture

Elastic Nipples

All nipples stretch during pumping, but some stretch a lot. "Elastic nipples" isn't a medical diagnosis — it's a term lactation consultants use for nipple tissue that pulls far down the flange tunnel, sometimes all the way to the end, even when the size looks right.

The research backs up how much stretch varies. When Philips analysed nipple stretch during expression, they found how far a nipple stretched depended mainly on how flexible the tissue was, not on its size before pumping. A randomised trial also found pumps made nipples measurably longer and wider than breastfeeding or hand expression did. So two people with the same measurement can need quite different flanges.

Signs you may have elastic nipples:

  • your nipple reaches the end of the tunnel, or close to it, on every size you try
  • a lot of areola is pulled in, even with a small flange
  • you're comfortable at the start of a session but sore or swollen by the end

Why it matters for sizing: elastic tissue can make a flange look too small, so people often size up — which pulls in even more tissue. Many people with elastic nipples actually do better with a closer fit plus extra support.

What can help:

  • lower the suction — you may not need the maximum to empty well
  • try a silicone insert or cushion, which holds back some breast tissue so less is drawn in
  • consider a tapered or angled flange designed for elastic tissue (see Flange shapes below)
  • a little lubricant can help the nipple glide rather than drag

There's no formal research on sizing for elastic nipples yet, so a lactation consultant is your best ally here.

Flat or inverted nipples

Flat nipples don't stand out much from the areola. Inverted nipples pull inward instead of pointing out. Both are common, and many people with them pump and breastfeed successfully.

How it affects sizing:

  • Measuring is harder. Stimulate your nipple first — roll it gently, or use your pump for a minute — then measure while it's drawn out. If it won't come out enough to measure, get help rather than guessing.
  • Your nipple may look different after pumping. Flat or inverted nipples often look longer once the pump has drawn them out. 
  • Size for the drawn-out nipple. Your flange needs to fit the nipple as it is during pumping, not in its resting state.
  • Watch the areola. Because less nipple stands out, a flange that's too big can easily pull in a lot of areola. A closer fit or an insert often helps.

For many people, flat or inverted nipples draw out more over time with regular breastfeeding or pumping. If yours don't, or pumping is painful, a lactation consultant can help you find the right fit and approach.

Short, flat or less stretchy nipples: smaller or larger?

In most cases, go closer, not bigger. When there's not much nipple to fill the tunnel, a larger flange mostly fills with areola instead. The Flange FITS™ guide (shared by NHS maternity services) describes a good fit as one where only the nipple is drawn into the tunnel. Areola going in, with swelling, is a sign the flange is too large. In the 2025 study that tested this approach, closer sizes improved both comfort and output.

Is some areola in the tunnel a big problem? Not always. A small amount that moves gently, with no pain, swelling or sore ring afterwards, can be fine — Australian research found slightly oversized shields didn't reduce milk removal on average. It becomes a problem when it causes swelling, a sore ring, pain or a breast that doesn't feel drained.

But don't go too small. If the tip of your nipple can't get into the tunnel easily, or it can't move once it's in, that size is too tight.

Practical tips that help:

  • Draw the nipple out first. Roll it gently, or run the pump on stimulation mode for a minute, before you judge the fit.
  • Try a closer size or an insert. A soft insert can also hold back areola so the nipple does the work.
  • Turn the suction down. Stronger suction pulls in more areola without removing more milk. Use the highest level that still feels comfortable, not the maximum.
  • Go easy on lubricant. A little helps the nipple glide, but too much can let more areola slide into the tunnel.
  • Use your hands. Gentle breast compression while you pump can help drain the breast when the nipple has less to work with.
  • Judge by results. If it's comfortable and your breast feels soft and drained afterwards, the fit is working — whatever it looks like.

When to get help

Getting your flange size right is one of the simplest ways to make pumping more comfortable, more effective and easier to keep up. Measure, start close, test a size either side, and re-check as your body changes. Small tweaks can make a big difference.

If your nipples need some TLC while you find your fit:

  • Silver nipple cups: worn between sessions to protect sore or cracked nipples while they heal. Some small studies suggest they may help, though the research is limited.
  • Hydrogel pads: cooling and soothing for tender, damaged skin.
  • Nipple balm: a gentle, lanolin-free balm after sessions helps keep skin supple.
  • Warm compresses: before pumping to help milk flow, or after if you have colour changes or burning pain.
  • Flange inserts: a quick way to try a smaller size without buying a whole new kit.
  • A break from the pump: hand-expressing for a session or two can give sore nipples a rest.

Speak to a lactation consultant, midwife or doctor if you have:

  • nipple pain that continues after changing size
  • cracks, bleeding or blisters that aren’t healing
  • a hard, red, painful area on your breast, or fever or flu-like symptoms (possible mastitis — see a doctor promptly)
  • a nipple that turns white, then blue or purple, with burning pain
  • a steady drop in supply you can’t explain

And remember: any amount of breast milk is a gift. Take it one session at a time. You don’t have to figure this out alone — pop into our Experience Centre in Parkhurst or chat to us on WhatsApp, and we’ll help you find your fit.

Flange Size FAQs

Are a breast flange and a breast shield the same thing?

Yes. Different brands use different names for the same part — the cone that sits on your breast.

What size flange do most people need?

Every person is different, so the right size is the one that fits you. That said, smaller sizes are more common than many people expect. In a 2025 study published in the Journal of Human Lactation, 15 mm and 17 mm were the most common comfortable sizes, even though most pumps come with a 24 mm flange in the box. Measure your nipples and test a few sizes rather than assuming the standard size will fit.

When should I measure my nipples for a flange?

Measure roughly from 36 weeks pregnant so you have a couple of sizes ready, then measure properly about two weeks after birth, once your milk has come in and early swelling has settled. After that, re-check every few weeks and whenever something changes, like new pain, a drop in output or a new pump. Read our full flange sizing guide for more.

How do I measure my nipples for a breast pump flange?

Gently roll your nipple between your thumb and finger so it stands out, then measure across the base in millimetres with a nipple ruler or a regular ruler. Measure the nipple only, not the areola, and measure both sides, as each one may need a different size. Read our full flange sizing guide for step-by-step methods.

Where on my nipple should I measure?

Measure across the base, where your nipple meets the areola. It's also worth checking the tip, as many nipples narrow towards the end and some people find a size closer to the tip more comfortable. Never include the areola — that's the most common reason people end up in a flange that's too big. Read our full flange sizing guide for more.

Should my flange be bigger than my nipple?

Not by much, and newer research suggests closer is often better. In a 2025 study published in the Journal of Human Lactation, parents who switched from a standard 21 or 24 mm flange to one closer to their nipple size pumped more milk on average and found pumping more comfortable. Start with a flange close to your nipple measurement, then test one size down and one up, and let comfort and output decide.

Should I measure before or after pumping?

Before, with your nipple gently stimulated. Pumping temporarily swells the nipple, so post-pump measurements can lead you to a size that's too big.

Can I use a different size on each breast?

Yes, and many people do. Nipples are often different sizes.

Will the wrong size affect my milk supply?

It can. A poor fit can make pumping less effective and more painful, which can make it harder to pump often enough. But supply depends on many things, so fit isn't always the cause of low output.

Do I need a new size if I change pumps?

Possibly. Sizes, angles and shapes vary between brands, so re-check the fit with any new pump.